Nespresso Pixie Stuck in Descaling Mode – 5 Easy Steps to Get Your Machine Out of Descaling Mode

Are you using Nespresso Pixie espresso machine since last 2-3 months and sometimes facing descaling problem with it?

I am here to say that if your Nespresso Pixie machine’s descaling head starts to flash, then do not really freak out.

If your Nespresso Pixie is stuck in the descaling mode, then there are few tricks which you can implement to get your machine out of descaling mode.

You can quickly exit the program by keep pushing the power switch for around 8 seconds.

Before operating the equipment again, you should give it a 10 to 15-minutes rest period.

The descaling nozzle has to be removed next.

By holding down the main and down levers at the same time for 3 seconds, you can locate the descaling mechanism on any Nespresso machine.

You can also hold the espresso and lungo buttons 2 seconds at a time.

You may do this according to the directions provided in your manual.

When you’re finished, the maintenance light must go off.

You may use a commercial descaler if the light is still orange.

Try to press every coffeemaker key separately if the descaling indicator remains on.

Next, hold down the main button and the down lever together for 3 more seconds.

This has to start the descaling process.

The indicator will turn green after the descaling procedure is finished.

After that, operate the coffee maker as normal.

If the indicator is green, use water.

You may attempt to clean the grounds using a descaler after the machine is in descaling mode.

You may either use a professional descaler or purchase one that is appropriate for your machine.

Keep in mind that if the commercial one has an enzyme, it will work better.

You may also attempt to solve the issue yourself if it continues.

The Nespresso Pixie machine’s status light holds the key to deciphering the function of the descaling mode.

When the indicator is green, the coffee maker is prepared to brew a cup.

When the status light alternates between green and red, descaling is required.

To completely descale a Nespresso Pixie, you should press and hold the two coffee controls for 3 seconds.

Remove the water reservoir from the machine as the first step in exiting the descaling mode.

Any remaining water that may have accumulated within the machine will be removed in this stage.

If indeed the level of water in your Nespresso device is inadequate, it is recommended to purchase a separate bottle of descaler and according to the owner’s manual.

An alternative is to buy a commercial descaler .

When a Nespresso machine is prepared, the status light will turn green.

The machine has to be descaling if it isn’t.

A Nespresso Pixie’s state indicator will now be orange and green.

The machine should then be cleaned using a descaler.

Two sachets of descaler are included, however, you may use any commercial descaler as long as you follow the product’s instructions safely.

To exit the descaling mode on the Nespresso Pixie, push the coffee button for three seconds.

If you’ve a Pixie, you should hold down two controls for 3 seconds.

The capsules must then be taken out of the machine and emptied.

Table of Contents

1 Main Reason Why Nespresso Pixie Won’t Exit Descaling Mode

Well, after extended usage, coffee makers, even Nespresso machines, develop deposits such as lime and calcium buildup from water.

Your machine may break down or cease operating properly if you use it for a long period without removing the calcium and lime deposits.

These deposits will be removed by descaling your machine, which will also enhance the taste and temperature of your coffee.

Your Nespresso machine should be descaled every 2 months at least.

Your system may sometimes enter descaling mode on its own if you refuse to do this, which indicates that it needs a break and proper internal cleaning.

Many people are reluctant to descale their Nespresso machines because they are concerned that it can get trapped in the descaling mode.

However, there is no need to be concerned about this problem.

In order to get your Nespresso Pixie machine out of its descaling mode, you will have to follow the below provided solutions.

Recommended Articles for You:

5 Simple Steps to Make Espresso Coffee in a French Press Machine

Learn How You can Use Cafiza to Clean Any Espresso Machine

Know How to Drink Espresso Romano with Lemon Peel

5 Simple Steps to Exit Nespresso Pixie Descaling Mode

It’s a simple operation that just requires a few minutes of your time to descale your Nespresso Pixie machine.

Please follow the given 5 steps to descale your Pixie.

Step 1:

The capsule container, drip dray, or any additional capsules within should be removed before turning on your Nespresso Pixie espresso machine.

Step 2:

Place a cup or container beneath the coffee sprout that can hold about 4 cups of water.

500 ml of water should be added to the water tank, followed by the Nespresso descaling solution.

Wait for the appliance to warm up before turning it on.

Step 3:

The spent descaling mixture may then be utilized to replenish the water tank when the flow has finished.

Press the lungo button to let the machine discharge the whole descaling mixture.

Step 4:

Rinse the water tank well after emptying it.

Fill it up again with new water, clean it, then empty it.

Clean the drip tray as well by giving it warm water and soap wash, then put it back in place.

Step 5:

As previously said, exit the descaling mode before giving your espresso machine a few seconds to rest before using it once again.

3 Steps to Reset Nespresso Pixie Espresso Machine

You need to know how to restore or reset your Nespresso Pixie to factory settings if you are unable to use it.

A Nespresso machine’s settings can only be changed by going back to the factory settings, which will restore them to their original state.

You need to reset the device for a number of reasons.

Occasionally, even after adjusting its settings, the coffee does not taste as nice as it should or the extraction process takes too long.

Simply follow the actions listed below to solve these issues.

Step 1:

The Nespresso Pixie should first be turned off.

The Lungo button should then be pressed and held for 5 seconds.

Hold down this button until the LCD panel’s green light blinks three times.

Allow the machine to re-heat for a minute.

The device should show the factory settings after being reset.

You may use your Nespresso Pixie machine as normal after you have recovered these settings.

Step 2:

Check to see whether the coffee is brewing as planned after reverting the Pixie back to its factory settings.

If not, you should insert the pod into the pod compartment and fill the water tank.

Now, as per your settings, your Pixie has to remember the cup size you selected.

However, even after resetting the machine, you can still have problems with coffee extraction.

Fortunately, these issues may be resolved by returning it back to its factory settings.

Step 3:

The Nespresso Pixie is simple to operate after you’ve reset it.

Simply keep pressing the Lungo button for 5 seconds while the machine warms up to achieve this.

Re-press the Lungo button to restart the device.

The Pixie will be ready to use after some time.

When it’s finished, just take out the battery and continue using it as normal.

By following the instructions in the user manual, you may reset the Pixie if you are having problems making coffee.

The buttons may then be changed to make more or less coffee.

Although you might need to perform a descaling procedure, this approach requires little time and effort.

Now, the coffee may be brewed in the precise cup size on the Nespresso Pixie machine.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top