Nespresso Won’t Exit Descaling Mode – 12 Steps to Get Your Nespresso Out of Descaling Mode

nespresso won't exit descaling mode
(Earning Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)

Nespresso coffee machines are extremely popular all over the globe because of their convenient espresso making style, their ability to prepare variety of coffee types and the taste of coffee that feels unique and flavorful.

However, just like other coffee machines, Nespresso coffee machines do have some disadvantages too.

One common problem that has been seen in these machines is sometimes, they can’t seem to get out of descaling mode even when they are already descaled.

The key step to exit your Nespresso’s descaling mode is to push the lever and button at the same time for around 6 seconds.

The machine will immediately get out of descaling mode after this if the green light turns on and off repeatedly.

After this, simply push and hold the lever for an additional 7 seconds after the green light stops flashing.

The procedure needs to end at this point.

Now, your Nespresso coffee machine is ready to serve you the hot coffee that you most desire.

You may always force the descaling process to end if it is taking too long.

The descaler will continue to operate until you turn it off and if the cycle repeats and you are unable to get the desired taste.

When the descaling procedure is finished, hold the power button down for an additional seven seconds.

Release the buttons once you see the light flashing every two seconds.

Ten minutes should pass after the descaling procedure is finished before using your Nespresso.

All you have to do to restore your Nespresso to top condition is to follow the above procedure.

I will now explain the actual steps that will help you get your Nespresso coffee machine out of its descaling mode as soon as possible.

Table of Contents

12 Simple Steps to Get Nespresso Machine Out of Descaling Mode

Step 1: If your Nespresso won’t come out of descaling mode, try holding the power button down for approximately six seconds before letting go.

You should restart your machine now.

Step 2: After that, the machine will start the descaling procedure once again.

If this procedure does not finish itself, you may need to conduct it again every few days.

Step 3: It’s time to restart using your Nespresso when you’ve done descaling it.

Now, the buttons ought to be functioning normally.

You should have no trouble drinking your coffee now.

Step 4: Try getting in touch with the Nespresso customer support for further help if you’re experiencing issues with your Nespresso machine.

It’s preferable to follow directions than to screw things up!

Step 5: You must hold the lever down for three seconds in order to turn off the descaling function on your Nespresso machine.

Step 6: Release the button when the green light starts flashing every two seconds and wait for the machine to finish descaling.

You may turn your machine back on and have your coffee when the cycle is finished.

You should seek help from the manufacturer if you run into any issues.

Step 7: When the green light has finished blinking, just wait for few seconds.

After the machine has become operational, you may drain the water completely.

Step 8: Now, hold the lever down for an additional six seconds if the LED is still flashing every two seconds.

By doing this, you can be confident that your Nespresso has successfully completed the descaling procedure.

Step 9: Your Nespresso could sometimes flash with lights.

By pushing the button one more time until the green light appears, you may end the descaling mode.

Your machine must be ready to use once again after being released.

Step 10: After the procedure is finished, if it still has a flashing light, it’s time to quit.

Then, you may have to hold off on brewing for at least 10 minutes.

By clicking the button, you may end the descaling process after cleaning your Nespresso.

Step 11: If you hold down the power button for three seconds, the green light will cease flashing after roughly seven seconds.

After seven seconds, you may push the buttons once again.

After that, you may reactivate your Nespresso.

In case of issues, get in touch with the manufacturer.

The button will flash quickly for seven seconds when the descaling is complete.

Step 12:  Finally, wash the water reservoir after the descaling procedure is done.

The descaling chemical will attach to any residue and taint your coffee if there is any.

Therefore, wash and clean your Nespresso machine with pure and fresh water for at least 3-4 times once descaling procedure is completed.

Recommended Articles for You:

5 Easy Steps to Get Your Nespresso Pixie Machine out of Descaling Mode

2 Reasons Why Nespresso Pixie Red Light Stays On

3 Reasons Why Nespresso Leaks Coffee into Capsule Box

6 Steps Solution to Solve Water Flow Problem of Nespresso Pixie

5 Steps to Properly Perform Nespresso Machine Descaling Procedure

Step 1: Follow Proper Descaling Procedure

When the Nespresso machine is warmed up and ready to use, the status light illuminates.

When a red or orange light appears, the machine must be pushed or the water supply has been depleted.

In order to prevent machine getting stuck in descaling mode, you will have to first carry out thorough descaling process of your machine.

I highly recommend to use Nespresso recommended Nespresso Descaling Solution to thoroughly clean your machine.

You can use other descaling solutions too like CLR Cleaner or Cafiza Cleaner.

Both of these espresso machine cleaners and descalers provide excellent cleaning results.

You can even use natural cleaning agents such as vinegar and lemon juice.

However, because of the strong odor, I do not advocate using vinegar.

The main downside of lemon juice is the huge volume required.

So, instead of these substances, it is best idea to use Nespresso Descaling Solution.

Step 2: Clean the Water Tank Completely

After that, I recommend to clean and descale the water reservoir of your Nespresso machine.

You can apply the descaling solution to the machine’s water tank.

The water tank of the Nespresso is substantially larger, and you don’t want to get the descaling solution too filthy when using these machines.

After the descaling solution has been used, you will need to thoroughly cleanse the water tank, empty it completely and then run clean water cycles for more than 3-4 times.

This will make the water tank entirely free from bacterial, fungal infection and limescale free.

Step 3: Select the Descaling Option on The Machine

To check that a capsule has been placed, open and close the machine before turning it off.

Unlike other devices that feature a physical power button, some devices, such as the Nespresso VertuoPlus, need you to press and hold a lever to turn them on.

The machine must then be placed into descaling mode.

Because the process varies for each machine.

Therefore, you should refer the machine manual or download it from the Nespresso website.

Then release the lever to make the lights flash.

Now, turn on the Nespresso machine before pushing and holding the espresso and lungo coffee buttons for 3 seconds.

Press the Lungo button, which is the only button on the Nespresso, to activate the Nespresso Pixie machine.

Make sure you understand all of the instructions provided in the machine’s handbook.

After the cleaning solution has been used, the machine will turn off when the tank is empty.

Step 4: Rinse the Machine with Cold and Filtered Water

Two rinses are required for a standard Nespresso machine.

Always. fill the cold-water reservoir to the top with the fresh and filtered water.

Then, start the cleaning cycle by pushing the same button.

As a consequence, water will be pushed to circulate throughout the whole system.

For the second cold water run, repeat the process.

If you have a bigger water reservoir on your Nespresso machine, you just need to flush once when utilizing the whole water capacity.

Step 5: Disable Machine’s Descaling Mode

Remove the device from the descaling option after the descaling is finished.

Normally, you would push both of these buttons at the same time to activate the descaling capability of the machine.

Push the main button and the down lever on the Nespresso at the same time for three seconds.

For precise instructions, see the machine’s handbook.

The machine should not be used for descaling again until the service light activates.

Why is The Descaling Light Still On After Descaling Nespresso?

Descaling light is a standard feature of many coffee machines and, when turned on, basically means the machine must be cleaned.

The indicator light can come On when lime or dirt particles accumulate in the internal components of the machine.

This causes the machine to become clogged.

When this problem happens, sometimes the device may stop working completely.

If you use a reusable K cup, it may sometimes overfill.

It can block the flow of water through the machine and cause the descaling light to appear.

As a result, the descaling light turn on and remains On till you clean or unclog the machine completely.


Christine Jacobs

Hi I am Christine and I am the proud owner of I am an avid coffee enthusiast and mother of a beautiful 9 years old daughter. I love writing and researching about coffee topics. This blog is dedicated to all the regular coffee drinkers and coffee machine users. Here, you will find the most comprehensive and thorough coffee tips and guides that you will not find elsewhere very easily.

Recent Posts