After few months of usage, your newly bought Nespresso Pixie maker can experience the issue of not pumping or supplying enough water.
Even though it may appear like a weird situation, it occurs more often than you would imagine.
All Nespresso coffee makers are equipped with a primed water circuit.
This means that the water is already present in its internal core components such as thermoblock, pipelines, and the compressor.
Nevertheless, the water within the coffee maker may have vaporized if it had been left idle for a long period or subjected to an extreme heat.
The loop is currently simply filled with internal air.
To exclude the possibility of some other issue, you should observe the water pump, whenever you press any keys for making your coffee.
If there are any issues with water supply, then you will experience that the noise of the compressor is often higher toned than the normal one.
An additional issue might arise if you cannot detect the compressor.
If you can’t find the root cause of this problem, then I highly recommend getting in touch with Nespresso customer support to solve the water supply issue.
There are possibly two issues that cause insufficient water supply in the Nespresso Pixie machine.
Those two issues are related to the airlock and water tank valves.
I will explain the 6 steps solution to fix these things and solve the problem of not enough pumping water by Pixie maker.
I recommend reading this article till the end to get your answers.
Table of Contents
- How Do You Fix a Nespresso Pixie Airlock?
- 2 Main Reasons Why Nespresso Pixie not Pumping Enough Water
- 6 Steps Solution to Fix Insufficient Water Pumping Problem of Nespresso Pixie Maker
How Do You Fix a Nespresso Pixie Airlock?
Air bubbles may obstruct the flow of water if you have not used the Nespresso Pixie maker for a while.
If you unintentionally turned it on without the tank filled with water, then also water glow can get obstructed.
As the water attempts to pass through the air pockets, your device pump will create an abnormally loud noise.
If any liquid does begin to leak, you will find that it contains a lot of air bubbles.
These air bubbles hinder the delivery of water to the brewer and are called airlocks.
I have provided few easy solutions below to get rid of these airlocks as soon as you see them.
2 Main Reasons Why Nespresso Pixie not Pumping Enough Water
2. Problems in Water Tank Valves
These are 2 primary reasons that cause Nespresso Pixie maker to not Pump enough water for coffee brewing.
So, you need to first find the right cause and then apply the following 6 step solution which I will mention below.
Recommended Articles for You:
6 Steps Solution to Fix Insufficient Water Pumping Problem of Nespresso Pixie Maker
Step 1: Verify the Water Tank Valve’s Functionality
Although it may seem simple, I have encountered so many jammed water tank valves that I feel compelled to urge you to double-check this problem.
Fill the water reservoir to the top, then squeeze the bottom with your fingertip to release the fluid.
Whenever you insert the reservoir in the Pixie coffee machine, you need to check few things first.
It is important to make sure that the valve is raised after you’ve confirmed that water flows out only when you push.
I’ve run across this issue before, while fixing Nespresso coffee makers.
In some cases, Nespresso coffee maker’s base was incorrectly assembled during construction.
This is why the water reservoir valve was not functioning properly.
So, you need to make sure that the valve is functioning as it should.
Step 2: Extract Air from the Circuit Naturally
The water reservoir should first be filled up to the top with water.
Greater water means more force on the pumps, which simplifies the process for the liquid to seep out.
If the compressor is really dry, it may not always be simple to take the water.
Therefore, I recommend to stroke the lungo key as if you want to make a cup of coffee and attempt it multiple times without being scared.
To gently push the water intake, you may even shake the reservoir while the pumping is functioning.
Step 3: Forcing Air Extraction from the Circuit
This method involves an air-filled sack or balloon to force water from the Nespresso reservoir into the compressor during brewing coffee.
That is why this air removal technique is referred to as the “airbag system.”
Air that has been held in the loop may rapidly exit due to the added compression.
It may be performed with just about any sack that will retain the air contained within.
The freezer bag is also excellent due to its tiny size and secure closure.
Step 4: Extract Air from the Circuit by Disassembling the Water Pipes
Next thing you need to do is make sure the above two steps are successful.
If the above two methods don’t work then you will need to manually access the piping and valve by disassembling the coffee maker’s cover.
Make sure there is no air within the circuit by checking each component.
You may take apart a few of the pipelines and allow the water to drain away with the help of gravitation.
Step 5: Clean the Front Perforating Disk
Lack of regular cleaning could be the cause of your coffee maker’s failure to boil water.
Nevertheless, rather than the internal circuitry, the issue might be with the front perforating disc.
This has a number of openings into which the coffee pours, but if they are too clogged, nothing would ever pour out.
Utilize an old cleaning brush and thoroughly clean the disk.
See whether the issue is resolved by making coffee without a capsule.
Step 6: Unclog the Water Pump of Nespresso Pixie Machine
Disassembling the enclosures and getting access to the water pump of Nespresso Pixie maker is the easiest and fastest way to clear internal blockage.
You should repeatedly strike the exterior of the pump while attempting to make coffee in order to release the piston.
Because of excessively hard water and other contaminants in the water, the pistons, springs, and other parts often get jammed.
Descaling your machine with the best Nespresso Cleaning Pods is the right way to remove this clogging.
If the coffee maker is still dripping some water, descaling could help fix this issue.
So, I highly recommend to follow these 6 steps remedy if you ever experience lack of proper water supply from your Nespresso Pixie maker.