Keurig Making Noise When Drawing Water – 4 Reasons and 5 Easy Solutions

keurig making noise when drawing water
(Earning Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)

I am non-functional without my coffee in the morning.

The past week I woke up and came to brew my coffee in my Keurig coffee maker.

Unfortunately, I found my Keurig making a humming noise.

So, I got bit curious and worried at the same time.

Therefore, I decided to research about this weird noise coming from my machine.

After hours of research, I found few reasons and their easy solutions online.

Here, in this article, I am going to share the reasons why Keurig makes noise while drawing water from its water reservoir.

I am also going to share some easy fixes to quickly solve this problem. 

Although, Keurig machines are known for not being so tranquil even when you unbox and use them for the very first time.

But, if your Keurig machine is creating excess noise then there must be a reason for it.

The most common reason is that the waterline of your machine gets clogged with coffee grounds and other stuff.

In this situation, your Keurig machine has to work harder to fetch the water from its tank.

As a result, it makes noise or large sound while drawing water from the reservoir.

However, you can easily fix this problem by descaling your machine with Keurig Descaling Solution.

I highly recommend to keep reading this article till the end to know the main issues and their solutions to fix this weird noise problem of your coffee machine.

Table of Contents

4 Reasons Why Your Keurig Makes a Loud Noise While Drawing Water

I am providing 4 possible reasons that may cause a loud noise when your Keurig coffee machine fetch water from its tank for coffee brewing.

1. Wrong Coffee Machine Placement

The first factor behind the loud noise of your coffee machine is its placement.

First check the surface type on which you have placed your Keurig machine.

Your machine will produce a horrendous sound when it vibrates during coffee brewing.

This happens because the machine is usually placed on a jagged or hard surface like concrete.

Therefore, never put your coffee maker on a hard surface to avoid loud noises.

2. Clogged Water Pipes with Mineral Deposits

Over a period, your Keurig coffee maker gets clogged with calcium, salt, and other mineral deposits.

This happens because you have been using tap water that is unfiltered.

Tap water contains several heavy metals and contaminants as well.

Although some of those minerals are beneficial for your health, they are not good for your machine health.

When such tap water with heavy mineral is heated, the heavy metals like calcium salts get deposited inside the machine parts.

Regular mineral deposits cause clogging of your machine components.

Therefore, it is recommended to use filtered or bottled water instead of tap water.

It contains fewer minerals that can clutter.

And it also helps to eliminate any weird noise that may come due to clogging of your machine.

3. Worn Out Old Coffee Maker Parts

If you are using an older model of Keurig machine since last few years, then obviously the machine parts get expired and damaged over time.

After they worn out, they start to make weird noises when you switch on your machine for coffee brewing.

In this situation, you definitely need to replace your old coffee maker with the new shiny one with latest technology.

The company has already introduced a new technology of quiet brewing in their newer models.

If your machine is too old and noisy then it lacks this new technology.

If you are having the old Keurig coffee machine, then I highly recommend it to replace it with a new one that is really quiet in its operation.

One such machine that I can recommend is Keurig K-Select coffee maker.

Its coffee brewing operation is really quiet and peaceful as compared to the older Keurig models.

Click Here to Get a New Keurig K-Select Single Serve Coffee Maker at Your Home.

4. Replace the Broken Water Pump

Another possible reason for large noises coming from your Keurig coffee machine could be its broken water pump.

If the water pipe or pump is broken from inside, then it makes weird noises when fetching water from the water tank.

In this condition, you need to replace it with the new one.

You can contact the company technician to get it replaced if you don’t know how to do it yourself.

Recommended Articles for You:

3 Easy Tips to Fix Excessive Water Pumping of Keurig Coffee Maker

5 Methods to Fix Water Leakage from Top of Keurig Coffee Machine

5 Solutions to Fix Add Water Message of Keurig Coffee Maker

5 Simple Solutions for Keurig Making Noise While Drawing Water

Kindly go through all the 5 remedies that are given below.

You will have to implement the right method depending upon the cause behind the machine’s loud noises.

1. Descale Keurig Coffee Machine Regularly

The best and the very first solution for your noisy Keurig machine is to descale it with either white vinegar or with a Keurig Descaling Solution.

The complete descaling process is given at this company website link.

The short descaling process is as follows.

a. First remove all the portable parts and wash them thoroughly with dish soap or with a detergent powder.

b. Then prepare either white vinegar solution or Keurig descaling solution by following the instructions provided with the packet.

c. After this, run hot vinegar or Keurig descaling solution through the coffee machine for at least 2 times.

d. Lastly, run another brew cycle with hot distilled water to eliminate the residue of the descaling solution and the smell of vinegar.

Follow this descaling procedure at least once a week to keep the machine running with its best performance.

2. Use Styrofoam

You can make use of a piece of Styrofoam or a small pad to reduce the noise production while machine fetches water from its water tank.

If it makes your kitchen look ugly then you can go for the sticky circles to dampen the clattering noise.

It won’t completely eliminate the sound but will definitely reduce it considerably.

3. Use Distilled or Bottled water

Avoid using your regular unfiltered tap water.

I have already mentioned above the reasons why you should not use tap water for your Keurig coffee machine.

Instead, try using distilled or filtered water for making your coffee.

Distilled water does not cause calcium or mineral deposits inside the coffee maker water pipes or water tank.

This way, you can minimize the internal deposits of sediments and minerals which in turn would not affect the functioning of water pipes.

Thus, it will help to maintain the proper functioning of the water tank and do not cause any weird noises while drawing water.

4. Replace the Old Damaged Coffee Machine

If your old Keurig coffee machine is already broken or damaged then also the machine produces a loud sound while drawing the water.

In this case, you should immediately replace your old model with new technology driven Keurig coffee maker models.

The newer coffee machines work more efficiently without making loud noises.

Click Here to Check out the Latest Keurig K-Select Coffee Maker That Makes Very Low Sound.

5. Clear the Blockage with Your Fingers

I recently watched a video from a Youtube user which has mentioned a great trick to reduce the noise coming from the water tank side.

According to this video, you can manually block the outlet by your fingers which generates a high pressure.

This high pressure clears all the blockage inside the water tank.

To understand this whole process, I recommend you to watch this short video completely.  

How Do I Unclog My Keurig Water Line?

After washing your water reservoir separately, follow this procedure to unclog your Keurig water line.

1. Prepare a mixture of white vinegar with cold water to make a diluted solution.

2. Pour it into the reservoir until it is filled two-third.

3. When the machine starts brewing, the diluted vinegar mixture will pass through the clogged water line.

It will remove all the debris.

4. Vinegar is a non-toxic, natural cleaner and it helps to clear all the residues and sediments collected inside the machine parts.

The acidic nature of vinegar helps to remove the calcium salts and the stains produced by the use of hard water.

5. Now place a large container under the outflow vent and keep on brewing it until all the vinegar solution is flushed.

6. Dispose the used vinegar mixture.

Then, fill the reservoir with fresh water.

Run brew cycle with the water for at least 2-3 times.

This will help you to get clean water without the strong aroma of vinegar.

You can even let the vinegar water stay in the reservoir for some time to get rid of the debris completely.

Other parts of the Keurig are removable.

Separate them and clean them carefully with dish soap to enjoy a freshly brewed cup of coffee.

How to Properly Clean My Keurig Coffee Machine’s Water Reservoir?

Here is a step-by-step procedure to clean your Keurig coffee machine’s water reservoir.

1. First, you will have to completely turn off the machine.

Let all the components switch down by themselves properly then disconnect the mains.

2. Remove the reservoir and take off its lid too.

Empty the water from the tank entirely.

Clean the part of the machine where the water reservoir rests.

You can clean the exterior with distilled warm water.

3. You can also use a detergent or dish soap to clean the inside of the reservoir.

I recommend to make use of a sponge to clean the reservoir delicately to prevent any damage.

You can leave it in the soap solution for some time to remove its darker stains.

4. Finally, run fresh water through the reservoir to thoroughly clean it.

Final Thoughts

By now, you have understood all the main four reasons why your Keurig makes noise while drawing water from its water tank.

Depending upon the problem, you can implement the right solution as mentioned above.

I also recommend to regularly clean the water tank and water line to avoid any noise issues.

Finally, a regular descaling of your Keurig coffee machine is extremely important to prevent any sedimentation and mineral deposits inside the machine parts.


Recent Posts