Breville Oracle Touch Tripping Breaker – 5 Real Causes and 5 Easy Solutions


breville oracle touch tripping breaker
(Earning Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)

Do you have one of the best espresso machines at your home, named as Breville Oracle Touch espresso machine?

It is truly is a next-generation, fully automatic espresso machine.

It is very easy to use and it is made up of durable stainless-steel material with much superior espresso brewing technology.

It comes with a portafilter and an automatic milk frothing system.

This is why you can prepare different types coffees in this machine from espresso to latte and cappuccino, etc.

I know it is a bit costlier when it comes to household coffee machines, but trust me, it is worth it if you are a regular espresso drinker.

And it will last you for almost 5-10 years without much issues.

In addition, it comes with a 2-year warranty.

So, if your machine faces any problem during this period, you can always ask Breville customer support to repair it or replace any damaged part without any extra cost.

However, like any other man-made machine, this Breville Oracle Touch do occasionally go through some technical problems.

One of those problems is tripping the circuit breaker.

There can be multiple reasons for tripping the circuit Breaker in case of Breville Oracle Touch machine.

Some of those problems include the damage of the power plug and the machine being overheated.

Sometimes a faulty wall outlet can also cause your machine to trip the circuit breaker.

The circuit breaker trips to protect your machine from fire as it automatically controls the electric power.

If your circuit breaker trips, it cuts off electricity to keep your machine from overheating.

If your machine is overheated, then you should give it a break and switch off the machine completely for few minutes.

Today, in this article, I am going to discuss all the 5 main possible problems that can cause the tripping of the circuit breaker in case of Breville Oracle Touch machine.

I will also provide 5 easy solutions to fix those problems on your own which is why you need to read this article till the end.

Table of Contents

5 Main Reasons Why Breville Oracle Touch Machine is Tripping Circuit Breaker

When a circuit breaker trips, it is not always the machine’s fault.

Some external factors also decide the overall health of your machine.

It can be due to the high rate of current flow or a power surge through the breaker.

Before the breaker tripping, your machine may show other issues as well, like the steam will stop coming and then water flow will also stop.

So, here are the 5 main problems that might be causing accidental circuit breaker tripping in Breville Oracle Touch machine.

Problem 1: Failure of the GFCI Outlets

If the GFCI outlets fail, it can trip the circuit breaker of your Breville coffee machine.

The fault in GFCI outlet can happen due to power surges or high current rate through the machine.

Bad GFCI outlets also affect O-rings and can damage them and then it can lead to circuit breaker tripping.

Sometimes, due to ground fault, the GFCI outlets get damaged too.

A fault in the power cord can also lead to GFCI failure in the machine.

Once GFCI outlets fail, then obviously the machine’s circuit breaker will trip.

Problem 2: Faulty Wall Outlet

The wirings of the house and kitchen where your coffee maker is stored, can wear and damage over a certain period of time.

These damaged wirings can also be one of the major causes behind the tripping of the breaker.

If not fixed this in time, then it may lead to short-circuit and damage of the machine’s internal circuit.

Problem 3: Overloading and Overheating Issues

When your Breville Oracle Touch machine is overheated, then also it can cause breaker tripping problem.

Over usage of the machine can lead to overload and overheating.

Lack of proper ventilation and prolonged use can cause tripping problems in your Breville coffee machine.

Problem 4: Loose and Damaged Gasket of the Boiler

If the boiler’s gasket or O-ring is damaged, it can cause tripping of the boiler circuit.

Therefore, it is important to pay attention to the rubber gasket and the O-ring of your machine and make sure they are working fine to prevent any circuit tripping problem.

Problem 5: Internal Component Failure

Another problem that can case circuit breaker tripping issue in your machine is the failure or damage of the machine’s internal components.

Tripping breaker may also occur because of insulation breakdown inside the machine.

5 Solutions to Fix The Problem of the Breville Oracle Touch Tripping Breaker

So now that you have understood the possible reasons for the Breville Oracle Touch tripping breaker problem, you will now learn how to solve them.

Here is the list of 5 solutions for the above given reasons.

Solution 1: Fix the Broken GFCI Outlets

GFCI means GROUND FAULT CIRCUIT INTERRUPTER.

So basically, GFCI balances the electric current moving through a circuit.

It is used in areas where a water source is present, and this outlet reduces the risk of electric shock.

If it is failed or broken, then you will have to replace it asap.

Otherwise, the breaker tripping problem happens in your Breville Oracle Touch machine.

For this problem to solve, you need to get in touch with the Breville customer support.

Solution 2: Fix the faulty Wall Outlet and Power Cord           

The wall outlet of your house wears after few years.

This may interrupt the proper flow of current that your machine wants.

The inconsistent current flow or accidental power surges can ultimately cause circuit breaker tripping in your machine.

Also, the machine’s power cord can get damaged over a period which can also cause breaker tripping.

So, make sure the power cord of your machine is properly working and also try different wall outlets in your home to prevent tripping problems.

Solution 3: Avoid Overheating and Overloading Problems

If you constantly use your machine for an extended period of time, your machine will likely face overheating problems.

I have already covered main causes of Breville Oracle Touch overheating in one of my other articles.

Overloading and overheating is not good for the overall health of your Breville machine.

These two issues often lead to tripping the breaker in many cases.

So, do not use your machine for an extended period.

Give it some rest of 10-15 minutes when you feel that the machine is getting hot.

I recommend placing your device in a spacious place for proper air circulation and ventilation so that the machine cools down quickly when it is heated.

Solution 4: Replace or Repair the Damaged O-Ring

A loose O-ring can also be the main reason behind tripping the circuit breaker.

So, you should first tighten it properly in its place.

If it is damaged completely, then you will have to replace this O-Ring.

Click Here to Get New Replacement O-Ring for Your Breville Oracle Touch machine.  

Solution 5: Change or Repair Internal Damaged Parts

Another issue that can cause accidental circuit tripping is damaged or broken internal parts of your Breville coffee machine.

If any part of your machine such as boiler, grinder or water tank is damaged or broken then it might affect the current flow of the machine too.

When this happens, the circuit breaker is tripped and your machine stops working.

In this situation, you either need to repair or replace the damaged part of your machine to solve this issue.

Recommended Articles for You:

Know More About Error Codes ER 12 and ER 15 in Breville Oracle Touch Machine

4 Solutions to Fix Breville Oracle Touch Tamping Problems

15 Main Problems Faced by Breville Oracle Touch Users

7 Things that Badly Affect Milk Frothing Function of Breville Oracle Touch

How Long Does a Breville Oracle Touch Machine Last?

As previously mentioned Breville Oracle Touch Machine is a bit expensive machine.

But if you are regularly drinking coffee, especially espresso, then this is not that expensive because with this machine, you will save a lot of money on buying espresso coffee separately from coffee outlets.

You may have to spend only 10 to 12 dollars per day with this machine.

This is the best coffee machine, in my opinion, compared to a low-cost machine.

Thus, it is totally worth buying for real espresso lovers.

This machine will last 5-10 years if you maintain it properly.

You will get a 2-year warranty during which you can contact Breville customer support if you want perform any repair without any extra cost.

References:

https://applianceanalysts.com/coffee-maker-blowing-fuses/

https://www.dfliq.net/blog/3-reasons-circuit-breaker-constantly-tripping/

https://www.youtube.com/watch?v=wVqYZc_7OLY&t=12s

https://www.youtube.com/watch?v=gDrkXnbZm6c

Recent Posts