A nice hot cup of coffee is definitely the most favorite early morning routine for most of the coffee lovers all over the world.
It’s my favorite routine too!
A well-brewed cup of coffee gives you all the freshness of the morning that keeps you energetic for the rest of the day.
Keurig coffee maker is one of the most preferred coffee brewers in the world.
It brews the best coffee for you in no time, with minimum issues.
However, being a man-made thing, it comes with its own disadvantages or defects too.
One of the most common issues that many Keurig owners face is Keurig still displaying the descale message even after it is being descaled.
That’s the issue I will be taking over in this whole article.
Don’t worry, I will explain all the possible reasons for the machine displaying this descaling message and will also provide the best solutions to fix this issue on your own.
The most common reason why Keurig still says descale after descaling is because you are using hard water.
Here, hard/strong water means water containing calcium particles.
The best way to fix this issue is by using soft water/normal water.
Also, keep cleaning your coffee brewer between 1-3 months to keep this issue away.
You can use a special Keurig descaling solution for descaling your coffee machine.
If your Keurig coffee brewer still doesn’t stop displaying the descale message, then there might be some other issues too.
I recommend reading this article till the end to know all the possible reasons that are preventing you from getting your favorite cup of coffee.
Table of Contents
- 3 Main Reasons Why Your Keurig Coffee Machine Say to Descale Even After Descaling the Machine
- 2 Easy Solutions to Clear the Descale Message on Your Keurig Coffee Machine
- 5 Steps to Reset Keurig Coffee Machine After Descaling
- 10 Important Steps to Reset the Descale Light on a Keurig Coffee Machine
3 Main Reasons Why Your Keurig Coffee Machine Say to Descale Even After Descaling the Machine
Keurig coffee brewer displaying the descale message even after it is being descaled, can be quite annoying and irritating problem.
It not only challenges you to do more troubleshooting but also prevents you from getting your daily dose of fresh coffee.
Here are 3 main problems that can cause this descaling problem in your Keurig machine.
Problem 1: Internal Clogging or Blockage
One major reason why your Keurig machine repeatedly displays the descale message is its internal blockage or clogging.
This blockage can be caused by limescale build-up inside the machine.
Because of this internal clogging, it reduces the water flow inside the machine.
This issue cannot be understood just by observing your machine from its outside.
The most visual thing you can observe is the build-up in the water reservoir.
When it happens, sediments start settling down in the reservoir.
Another symptom that can alert you of blockage in your machine is the presence of a white film up on the sides of the reservoir.
If you observe these things, get them fixed right away.
I highly recommend using Keurig Descaling Solution in this case to solve the internal clogging of your machine.
Problem 2: Packing Refillable K-Cups too Tightly
If you are using refillable or reusable K-Cups for brewing coffee in your Keurig coffee maker, then it can also cause this problem.
If you overfill these reusable k cups with coffee grounds, then water flow gets obstructed.
And it leads the machine to flash descale light frequently and it then keeps displaying the descale message repeatedly.
Problem 3: Exit Needle is Clogged
Another possible reason for your machine displaying the repeat descale message can be the clogging in your machine’s exit needle.
The exit needle is present on the inside bottom K-Cup holder.
It can be clogged due to smaller coffee grounds or cocoa mix particles.
This is the reason you need to regularly clean and remove clogged particles from the exit needle of your Keurig coffee machine.
These are the 3 main reasons that cause your Keurig to say descale even after it is being descaled.
Check which of the aforementioned reasons is causing issues in your coffee machine and implement a proper solution.
In case none of the solutions work with your machine, it’s best to contact the Keurig customer support to solve this problem asap.
2 Easy Solutions to Clear the Descale Message on Your Keurig Coffee Machine
To avoid getting the descale message repeatedly on your Keurig coffee machine, you need to first find the underlying reason that is causing this issue.
However, if you don’t know the true reason behind this problem, then I recommend checking out the above 3 reasons to find your real cause of the problem.
Here are 2 simple solutions to remove the constant descale message from your Keurig machine.
Solution 1: Clean Exit Needle of the Machine
Clogging in the exit needle of your machine can be a major reason for the repeated descaling message issue.
To fix this, you need to clean it and remove the clogged debris from the needle on a regular basis.
It is located on the inside bottom of the K-Cup holder.
You can clean the exit needle using a paper clip or similar tools like that.
To do it, remove the K-Cup funnel and insert the paper clip into the tube.
Move it across the funnel to remove the present clogs and other debris out of the needle.
Once the needle is free from debris and clogging, then you will not see repeat descaling message on your Keurig machine.
Solution 2: Clean the Water Reservoir Properly
The descale message can also be displayed if there is internal blockage and clogging inside the water reservoir and water pump of the machine.
To fix this issue, you need to clean the water reservoir properly.
To clean the water tank, first unplug the brewer and remove both the water reservoirs from the machine.
Make sure that there is no internal clogging or debris remained inside the water lines, water pump and water tank which can obstruct the water flow.
After that, re-attach the reservoirs at their places and see whether the machine still displays the descaling message or not.
The above mentioned methods are the best solutions that can fix the issue of your Keurig saying descale even after being descaled.
If any one of these methods don’t work for you, then it would be better for you to contact the official Keurig customer support team to get the best assistance.
Recommended Articles for You:
4 Reasons Why Keurig Keeps Saying Add Water Even When Water Tank is Full
3 Reasons Why Keurig Machine Overflows Coffee Grounds
4 Solutions to Fix Power Button Problem of Keurig Machine
5 Solutions to Fix Keurig Making Noise while Drawing Water
5 Steps to Reset Keurig Coffee Machine After Descaling
The steps for resetting a Keurig machine are quite simple if followed properly.
Below, I have mentioned 5 easy steps which will help you reset your Keurig 2.0 coffee brewer quite easily.
Step 1: Turn your coffee brewer OFF and unplug it for a few minutes.
Step 2: Remove the water reservoir from the machine before plugging it back in. Wait a few minutes.
Step 3: Plug the coffee brewer back and power it ON.
Step 4: Now reattach the water reservoir that you pulled out during unplugging the machine.
Step 5: Finally, try opening and closing the K-Cup holder.
And this is how you reset Keurig 2.0 coffee machine.
10 Important Steps to Reset the Descale Light on a Keurig Coffee Machine
The best way to reset the descale light on your Keurig coffee machine is by descaling the machine using the company recommended Keurig Descaling Solution.
Special Note: This solution contains citric acid and you need to be little cautious while completing the descaling procedure.
Here are 10 simple steps that will help you reset the descale light on a Keurig coffee machine with the help of Keurig descaling solution.
Step 1: Turn the machine off and unplug it from the power source.
Step 2: Make sure to empty the water reservoir.
Step 3: Detach the water filter present inside your water reservoir.
Step 4: Remove all the available pods on your machine.
Step 5: Apply the Keurig descaling solution inside the machine and start clearing out any buildups in the machine by following the instructions provided on the bottle.
Step 6: Plug it into the power source and turn it on.
Put a coffee cup underneath the coffee brewer.
Step 7: Run the machine so all the solution goes out and then add more water.
Step 8: Dispose of the solution down the sink from the machine and leave it for around 30 minutes to get the best results.
Step 9: Clean the water reservoir properly once you dispose of all the scaling solution and fill it again with fresh water.
Step 10: Complete a full water brewing test to flush all the solutions out of the machine.
It is suggested to do this procedure around 12 times to get the best descaling results.
And it’s done.
You have descaled your Keurig coffee brewer successfully using the Keurig descaling solution.
Now, you won’t face the issue of the descaling light turning on even after you descale the machine if you regularly follow this descaling procedure.
References:
https://support.keurig.com/?page=shell&shell=knowledge-article&kmContentId=1012522
https://www.youtube.com/watch?v=I7RtD0zRcIQ